Wrenches For Sale
To order; email, phone or write:
Don Haury - 7913 SW 24TH - Halstead KS 67056 - 316-283-5876 or 316-284-7345
donhaury@southwind.net
Postage is extra. Most items shipped by priority mail.
Send me your want list as I have a lot of wrenches that aren't listed.
Got any wrenches to sell or trade? Let me know, I'm always looking for more.
Please bookmark this page and check back frequently as more wrenches will be listed

Click Here for IHC Wrenches - - - Click Here for J I Case Wrenches

******* Farm - Misc. *******

B. F. Avery & Sons "E1014" Wrench - (Louisville, Kentucky)

Side one marked: "B. F. Avery & Sons - Lou. KY" Side two marked: E1014 Length: 18" Reference: Rathbone's book page 37 Condition: Good Plus Price: $55.00 (ref: FW042-2)
This big impressive looking wrench is the largest of the known B. F. Avery and Sons wrenches. B. F. Avery manufactured several different farm implements as well as tractors. They were acquired by the Minneapolis Moline Company in 1951.

*****************************

Moline Plow Co. / Minneapolis Moline "E1014" Wrench - (Moline, Illinois)

Side one marked: "Moline Plow Co." Side two marked: B169 Length 14" Reference: Rathbone's book page 332 Condition: Excellent Price: $40.00 (ref: FW046-1)
This wrench came with Moline's Gang Plows, Disc Plows, and Cultivators.

*****************************

Samson Tractor / Janesville Machine - Butcher & Taylor - Eggleston - - "Shares N167"

Side one marked: SHARES Side two marked: N167 Length: 5½ inches Reference: Rathbone's book pages 46 and 421 Condition: Excellent (About as good as they come) Price: $25.00 (ref: FW008-002 )
According to Rathbone's book. Shares refers to a harrow invented by D. W. Shares and manufactured by both William W. Eggleston of Albany, NY and the Belcher & Taylor Agricultural Tool Co., Chicopee Falls, Mass., but recently a parts book for the Samson Tractor Co. of Janesville, Wisconsin has been seen that lists and pictures this wrench under repairs for the Janesville Tractor Gang Plow. This parts list would have been issued after 1919 when General Motors purchased and consolidated the Samson Tractor Co. and the Janesville Machine Co.

*****************************

Advance-Rumely Thresher Company - Battle Creek, Michigan "170J" Wrench

Side one: marked 170J Side two: not marked Length: 10" inches Reference: 1902 Advance Thresher Co. Parts Book. Not in Rathbone's book Condition: Excellent Price: $45.00 (ref: FW031-2)
This previously unidentified wrench is listed in a 1908 parts lists for the Advance Thresher Company of Battle Creek, Michigan as being issued with their simple and compound steam engines. Several of the known Advance wrenches are similar to this one; thick, heavy and crudely cast. See the Wrenching News List of Advance Stream Engine and Threshing Machine Wrenches for more information. After 1911 when Rumely acquired The Advance Company these wrenches were listed in their parts books.

*****************************

Advance-Rumely Thresher Company - Battle Creek, Michigan "169J" Wrench

Side one marked: 169J Side two not marked Length: 7.75" inches Reference: 1902 Advance Thresher Co. Parts Book. Not in Rathbone's book Condition: Good Plus with some edge dings SOLD
Another of the previously unidentified wrenches found listed in a 1908 parts lists for the Advance Thrasher Company of Battle Creek, Michigan as being issued with their simple and compound steam engines. Several of the known Advance wrenches are similar to this one; thick, heavy and crudely cast. See the Wrenching News List of Advance Stream Engine and Threshing Machine Wrenches for more information. After 1911 when Rumely acquired The Advance Company these wrenches were listed in their parts books.

*****************************

Advance-Rumely Thresher Company - Battle Creek, Michigan "214A" Wrench

Side one marked: 214A Side two not marked Length: 6.50" inches Reference: 1902 Advance Thresher Co. Parts Book. Not in Rathbone's book Condition: Excellent with a nice dark patina Price: SOLD
This is the smallest known of the previously unidentified wrenches found listed in a 1908 parts lists for the Advance Thresher Company of Battle Creek, Michigan. It is described as an "oil cup wrench and was issued with their simple and compound steam engines. Several of the known Advance wrenches are similar to this one; thick, heavy and crudely cast. See the Wrenching News List of Advance Stream Engine and Threshing Machine Wrenches for more information. After 1911 when Rumely acquired The Advance Company these wrenches were listed in their parts books.

*****************************

Advance-Rumely Harvester Wrench "D5D1096"

Side one marked: "D5D-1096" with an A in a circle logo
Side two: unmarked
Length: 14 inches
Reference: Advance-Rumely parts catalog
Condition: Excellent
Price: $75.00 (ref: FW009-2)

This wrench which is not listed in Rathbone's book has recently been identified as a header axle wrench for a No. 3 Advance-Rumely Prairie Type Combine Harvester. It is pictured in a parts catalog owned by a Missouri Valley Wrench Club member.

*****************************

Advance Rumely Threshing Machine Wrench "C3K236"

Side one marked: "C3K236" Side two: not marked Length: 11 inches Reference: Advance-Rumely Threshing Machine Parts Book for threshing machines. Not in Rathbone's Condition: Excellent with strong high relief embossing but does have a small drilled hang hole about 2" from the larger end. SOLD
Listing found in a Parts Lists for Rumely Ideal Steel Separators states this wrench is a "socket wrench for beater head". A nicely embossed double square socket wrench with a nice dark patina.

*****************************

Advance-Rumely Threshing Machine Wrench "R43"

Side one marked: "R-43"
Side two: not marked
Length: 4 x 7 inches
Reference: Rathbone's book page 406
Condition: Good Plus
Price: $15.00 (FW012-003)

This T-handled square socket wrench is listed in Advance-Rumely repair parts lists for their threshing machines.

*****************************

Rumely 43R (error for Rumely R43?)

Side one marked: "43R" Side two: not marked Length: 4 x 7 inches Reference: Not in Rathbone's Condition: Excellent with strong high relief embossing SOLD
This wrench is identical to the R43 wrench identified from listings found in Advance-Rumely parts books. I have not been able to find a reference for a number 43R wrench in any Rumely or other parts books so I think that this is probably a mold makers mistake for the Rumely R43 wrench. If any body knows different I would appreciate an email. Considerably rarer wrench than the 43R and in great condition.

*****************************

Advance-Rumely Harvester Wrench "D3J31" La Porte Ind

Side one: marked "D3J31" and an "A" in circle logo
Side two: not marked
Length: 6 inches x 8.25 inches
Reference: Rathbone's book page 405
Condition: Good Plus
Price: $25.00 (ref: FW038(002)

This tee type socket wrench as been found in Advance Rumley Parts Books for their early combine harvesters.

*****************************

Valve Port Cap Wrench for Heider Rock Island and Yuba Gas tractors

Side one not marked Side two not marked Length: 10.25 inches Reference: Parts list for Heider Tractors, Rathbone's page 501 Price/Condition: $40.00 / Good Plus (ref: FW034-003) Price/Condition: $25.00 / Not as nice with overall pitting (ref: FW034-002)
A listing for this wrench as a "valve plug wrench" can be found in a 1921 Rock Island Plow Company Parts List for Heider Tractors. Rock Island begin selling tractors manufactured by the Heider Manufacturing Company of Carroll. Iowa in 1914 and purchased the company in 1916. Ratrhbone's book has a parts book picture of the same wrench attributed to the Yuba Manufacturiong Company of Marysville and Benecia, California. As both these tractor companies used Waukesha engines this wrench is probably correct for other tractors, etc using the same engines.

*****************************

Unlisted Lauson Gas Tractor Wrench "T500" - New Holstein, Wisconsin

Side one: "T 500" Side two: Unmarked Length: 7 inches Reference: Lauson Tractor Parts Lists - Not in Rathbone's Book Condition: Good Plus with no signs of heavy use or abuse, some minor pitting SOLD
This cast iron hex head wrench was on the unidentified or "orphans" list till a friend recently discovered it in a Parts Catalog for a 1920 Lauson 15-30 "Full Jewel" Tractor listed as "T500 - Front Wheel Cap Wrench". It was possibly issued with other tractors also as the John Lauson Manufacturing Company was in business from approximately 1883 to the mid 1930's and beside gas tractors they manufactured steam traction engines and The Lauson Frost King Gas Engine but I have only seen this one Lauson Parts Book. The old big tractor tools are hard to find and here is an unlisted one in above average condition.

*****************************

Cockshutt Plow Company Wrench "P4185" - Brantford, Ontario, Canada

Side one marked "P4185" Side two: Unmarked Length: 10½ inches - - With 2¾ inch octagon box end Reference: Rathbone's book page 107 Condition: Excellent - - Neat looking old wrench with no signs of use or rust Price: $25.00 (ref: FW001-003)
This wrench with the decorative open handle and large octagon opening looks more like an automobile hub cap wrench than an implement wrench but it is listed in Rathbone's book as a Cockshutt Plow Company product.

*****************************

Avery Steam Engine Wrench "1224" - Peoria, Illinois

Side one marked: "1224"
Side two: unmarked
Length: 14 inches
Reference: Old Avery Parts Catalogs not in Rathbone's
Condition: Good Plus, no cracks, rust, or pitting, minor edge dings. Nice dark patina.
Price: $55.00 (ref: FW027)

This heavy duty, cast, double hex socket wrench is not listed in Rathbone’s book but I have an early Avery Company Parts Lists that pictures this wrench and lists it as a "Socket wrench for ¾ inch hexagon nuts on Avery steam engines". It may of been issued with other Avery tractors and threshing machines as well. I will include with the wrench a copy of the page from the parts list that shows the wrench. See page 25 of Rathbone's book for more information on the Avery Company .

*****************************

Avery 25-50 Gas Tractor Wrench "4271" - Peoria, Illinois

Side one: "4271"
Side two: Unmarked
Length: 10 7/8 inches
Reference: Avery Tractor Parts Book - Not pictured in Rathbone's Book but listed in the Supplement
Condition: Excellent with no signs of misuse and a nice uniform dark patina
Price: $50.00 (ref: FW018)

I had this wrench with my automobile hub cap wrenches till I found it pictured in an Avery Parts List for their large gas and kerosene 25-50 Horsepower Tractors. It has a 2 7/8 inch hex box on one end and a 2 1/4 inch hex box on the other end. It is listed as a carburetor wrench and I have tried it on a friends Avery Tractor and it did fit the large nut inside the carburetor bowl. This wrench may have been issued with other Avery Tractors but I have only seen the parts lists for the 25-50. I will include a copy of the tool page from the parts list with this wrench.

*****************************

Avery Steam Engine Tractor Wrench "94"

Side one: "94"
Side two: Unmarked
Measurements: 13 ¾ inches by 7 inches
Reference: Avery Repair Parts Catalog - Not in Rathbone's Book
Condition: Excellent with just a very few minor dings, no rust, pitting or breaks
Price: SOLD

This wrench is listed and pictured an old Avery company of Peoria, Illinois Parts Catalog as a "Tee wrench for safety plugs on Avery Steam Engines and Steam Plows" I will include a copy of the tool pages from the parts list with purchase.

*****************************

Avery Wrench "5089" Tee Socket Wrench

Side one: "5089"
Side two: Unmarked
Measurements: 3 7/8 inches by 10 inches
Reference: Rathbone's book page 26 and Avery Parts Catalogs
Condition: Excellent, no rust, pitting or breaks
Price: $20.00 (ref: FW020)

This wrench is listed and pictured In Avery Company of Peoria, Illinois Parts Catalogs as a "Wrench for all cultivators (Mystic, Mystic Jr, Ajax, Easy, Busy Bob, Doublet, and Togo Models) and Perfection, Prince, and Princess Planters"

*****************************

Avery Wrench "5089" Tee Socket Wrench (four socket variation)

Side one: "5089"
Side two: Unmarked
Measurements: 4 inches by 10 3/8 inches
Reference: Rathbone's book page 26 and Avery Parts Catalogs
Condition: Excellent with a couple minor edge dings
Price: $25.00 (ref: FW021-002)

Avery 5089 (four socket variation) Wrench

Same wrench as listed above but with an extra square socket top center of wrench.
This wrench is listed and pictured In Avery Company of Peoria, Illinois Parts Catalogs as a "Wrench for all cultivators (Mystic Mystic Jr, Ajax, Easy, Busy Bob, Doublet, and Togo Models) and Perfection, Prince, and Princess Planters".

*****************************

Avery Wrench "251"

Side one: "Avery"
Side two: "251"
Measurements: 7 inches
Reference: Rathbone's book page 26 and Avery Parts Catalogs
Condition: Good with minor pitting
Price: $20.00 (ref: FW022-002)
Condition: Fair with over all rust pitting
Price: $10.00 (ref: FW022-001)

This wrench is listed and pictured In Avery Company of Peoria, Illinois Parts Catalogs as a "Wrench, old for all Mystic, Mystic Jr, Ajax, Easy, Busy Bob, Doublet, and Togo model cultivators".

*****************************

Nichols & Shepard / Oliver Threshing Machine and Early Combine Wrench "F2-0005" - Battle Creek, Michigan

Oliver - Nichols & Shepard F2-0005 Wrench

Side one marked: F2-0005
Side two not marked
Length: 6" by 8.5"
Reference: Nichols & Shepard Co (Battle Creek, Michigan) Factory Parts Price Lists and Oliver Nichols & Shepard Combine Parts Price Lists (not listed in Rathbone's book)
Condition: Excellent
Price: $85.00 (ref: NS-003 )

This tee shaped socket wrench has been found listed in Nichols & Shepard Parts books for their Red River Line of Grain Separators equipped with Hart Feeders and later in Oliver Nichols & Shepard Combines. The F2-0005 wrench evidently replaced Hart's much more common similar No 31 wrench on Nichols & Shepard and Oliver equipment.

*****************************

Nichols and Shepard / Oliver Steam Engine Wrench "1340" - Battle Creek, Michigan

Side one marked:"1340" Side two not marked Length: 13.75 inches Reference: Nichols and Shepard parts book and Rathbone's page 352) Condition: Good with hammer marks on one end Price: SOLD
This wrench is listed in Nichols and Shepard Parts Books for their steam engines. Nichols and Shepard became part of the Oliver Farm Equipment Company in 1929.

*****************************

Nichols and Shepard / Oliver Steam Engine Wrench "4851" - Battle Creek, Michigan

Side one marked:"4851" Side two not marked Length: 10 inches Reference: Nichols and Shepard parts book (listed in Rathbone's Supplement but not pictured in book) Condition: Good Plus Price: SOLD
This wrench is listed in Nichols and Shepard Parts Books for their steam engines. Nichols and Shepard became part of the Oliver Farm Equipment Company in 1929.

*****************************

Massey Harris - Case Plow - Wallis Tractor Wrench "3854"

Side one marked: "3854"
Side two: Unmarked
Length: 5 1/4 x 12 1/2 inches Y-shaped socket wrench
Reference: Rathbone's book page 480
Condition: Good Plus with just a few dings, mostly on the socket edges. No cracks or pitting.
Price: $50.00 (ref: FW002)

This heavy duty Y-shaped wrench is listed in Wallis Tractor parts catalogs as a socket wrench for rear axle bearing caps. The Wallis Tractor Co. of Racine, Wisconsin was part of the J. I. Case Plow works when Case was purchased by Massey Harris in 1927. This enabled Massey Harris to enter the tractor market.

*****************************

Wallis - Massey Harris - Case Plow - Tractor Wrench "1836"

Side one: marked "1836" Side two: not marked Length: 9 inches Reference: Parts List for Wallis Tractors, not in Rathbone's Condition: Good Plus Price: $40.00 (ref: FW035-001)
This thin malleable iron single open end wrench is listed in Wallis Tractor parts catalogs as a " water pump and fan eccentric wrench".. The Wallis Tractor Co. of Racine, Wisconsin was part of the J. I. Case Plow works when Case was purchased by Massey Harris in 1927. This enabled Massey Harris to enter the tractor market.

*****************************

Wallis - Massey Harris - Case Plow - Tractor Wrench "2362

Side one: marked "2362" Side two: not marked Length: 9.5 inches Reference: Parts list for Wallis Tractors, not in Rathbone's Condition: Excellent Price: SOLD
This hex socket wrench with handle was identified from a listing found in Wallis Tractor parts catalogs. The Wallis Tractor Co. of Racine, Wisconsin was part of the J. I. Case Plow works when Case was purchased by Massey Harris in 1927. This enabled Massey Harris to enter the tractor market.

*****************************

Massey Harris Spark Plug Wrench "202783M1"

Side one marked: <MH> SPARK PLUG WRENCH 202783M1
Side two marked: MADE IN CANADA
Length: 10¼ inches
Reference: Rathbone's book page 312
Condition: Excellent with no signs of misuse.
Price: $22.00 (ref: FW003)

Massey Harris spark plug wrench with a 12 point ¾ inch box end.

*****************************

Superior Drill Co. and American Seeding Machine Co. (Springfield, Ohio) "B573" Wrench

Side one marked: "B 573" Side two not marked Dimensions: 8.5 inches Reference: Old Parts Lists and Rathbone's book pages 32, 16, and 446 Condition: Excellent Price: $15.00 (ref: FW044-001)
The Superior Drill Company was one of the companies that formed the American Seeding Machine Company in 1903. Rathbone's book also shows this wrench for the Bickford and Huffman Company of Macedon, New York. They were also one of the companies that combined to form the American Seeding Machine Company circa 1903.

*****************************

Caterpillar Tractor Company (Peoria, Illinois) Wrench 6F3703

Side one marked:"6F3703" and a "T" Logo Side two not marked Dimensions: 9 inches Reference: Caterpillar parts book Condition: Excellent Price: SOLD
This double male hex socket wrench is not in Rathbone's wrench book but I have a Caterpillar parts books for a 1940's Cat D6 tractor that lists it. I would assume it is a drain plug wrench. It may of also been furnished with other Caterpillar products but I don't have all the Cat parts books and have only seen it in the D6 book. I can include a copy of the tool page with the wrench.

*****************************

Caterpillar Tractor Company (Peoria, Illinois) Wrench 1D3363

Side one marked:"1D3363" Side two not marked Length: 13.75 inches Reference: Caterpillar parts book and Rathbone's book Vol One-pg85 Condition: Just a few dings on the edges, otherwise Excellent Price: SOLD
A heavy duty double hex box wrench with large bold markings and dark patina.

*****************************

Caterpillar Tractor Company Peoria, Illinois) Wrench 7B8975

Side one marked:"7B8975 Side two not marked Dimensions: 12.5" inches Reference: Caterpillar parts book Condition: Good Plus with some dings and wear, markings not real clear but readable. Price: $35.00 (ref: CAT003-001)
This odd square box end wrench with a scraper blade on the end is not in Rathbone's books but has been identified from a listing in a Caterpillas Motor Grader Parts Book where it is discriped as being used on the shift table blade.

*****************************

Grand Detour Plow / Case Threshing Machine Company T147 Wrench - Dixon, Illinois

Side one: Marked "T147" and a "C" logo Side two: not marked Length: 8 inches Reference: Rathbone's book page 205 Good Plus with some edge dings and nice patina Price: $20.00 (Ref: FW-043)
This cast wrench with a hammer head is from the Grand Detour Plow Company which was founded by John Deere and Leonard Andrus in 1837 and was bought by the J. I. Case Threshing Machine Co. in 1919. Case operated the plant till 1932.

*****************************

Fasts Coupling Wrench - No 2

Side one marked: "FASTS COUPLING"
Side two marked: "2"
Length: 11 inches
Reference: Rathbone's book page 176
Condition: Good Plus with only a trace of surface roughness.
Price: $20.00 (ref: FW004) SOLD

No information known concerning the company that produced this six point socket wrench in the traditional silo wrench shape. A 6¾ inch version of this wrench is marked "1".

*****************************

Star Drill Wrench with Hammer "100" - Rushville, Indiana

Side one marked: "STAR DRILL 100"
Side two: not marked
Length: 7 inches
Reference: Rathbone's book page 437
Condition: Good with no breaks or dings but it does have overall pitting.
Price: $30.00 (ref: FW005) SOLD

This wrench with the neat little hammer has no signs of use and the lettering is readable but it does have surface pitting.

*****************************

Allis Chalmers / La Crosse Works Wrench "800755"

Side one marked: "ALLIS CHALMERS MFG. CO. LA CROSSE WORKS" Side two: "800755" Length: 11½ inches Reference: Rathbone's book page 11 Condition: Excellent with orginal paint, looks like it was never used. Price: $60.00 (ref: FW023-3)
A double box end Allis Chalmers (of Milwaukee, Wisconsin) wrench from the Old La Crosse Tractor Works factory. Rathbone's book pictures only six identified Allis Chalmers wrenches, this is the only one marked "Allis Chalmers".

*****************************

Allis Chalmers Wrench "TC369" - Milwaukee, Wisconsin

Side one marked: "TC369"
Side two: not marked:
Length: 9¾ inches
Reference: Rathbone's book page 11
Condition: Excellent near mint with no signs of use and most of it's original orange paint.
Price: $15.00 SOLD
Have another not as nice, no paint, pitted for $12.50 (ref FW007-002)

A double box end Allis Chalmers wrench in new old stock condition.

*****************************

Gehl Brothers Mfg. Co. "XX5" - West Bend, Wisconsin

Side one marked:"XX5" Side two: unmarked Length: 14 inches Reference: Gehl Ensilage Cutter Repair Parts List Condition: Excellent Price: $35.00 (ref: FW010)
Here's another "orphan" that has recently found it's family with the discovery of a Gehl Brothers Ensilage Cutter parts list. This wrench along with similar wrenches: 42, B72, KL72, R72, N72, N720, and UX5 make an interesting grouping. Not in Rathbone's book.

*****************************

Montgomery Ward Cream Separator Wrench

Side one marked: "MONTGOMERY WARD" Side two unmarked Length: 8 inches Reference: Rathbone's book page 336 Condition: Good Plus with some minor pitting on the back side. Price: $37.50 (ref: FW011) SOLD
Although no parts list as been seen for this wrench, the style would indicate that it was for a cream separator sold by Montgomery Ward.

*****************************

Rock Island Plow Company Wrench "D239"

Side one marked: "D239" Side two: No markings Length: 10 inches Reference: Rathbone's book page 400 and old Rock Island parts catalogs. Condition: Excellent - - Almost perfect with good uniform color and hardly any signs of use. Price: $24.00 (ref: FW013-002)
This wrench is listed in old Rock Island parts lists as being furnished with their Great Western Manure Spreaders. This Rock Island, Illinois firm which started business in the 1850's was acquired by J. I. Case in 1937. An interesting looking wrench in great condition.

*****************************

Moline Plow Co. and Sattley Mfg. Co. Sulky Plow Wrench "PR40"

Side one marked ""PR40"". Side two: Unmarked Length: 10¼ inches Reference: Rathbone's book pages 333 and 413 and old parts catalogs. Condition: Excellent looks unused with some traces of original paint. Price: $24.00 (ref: FW014-003)
Although there is no known connection between the two companies this wrench is listed in both Moline Plow Company of Moline, Illinois and Sattley Manufacturing Company of Racine, Wisconsin parts lists for sulky plows. Moline Plow Co. became part of Minneapolis Moline in 1929 and Sattley was purchased by Montgomery Ward in 1916.

*****************************

Walter A. Wood Mower & Reaping Machine Company Wrench - Hoosick Falls, New York

Side one: "Wood". Side two: unmarked Length:11½ inches Reference: Rathbone's book page 494 Condition: Good Plus with a nice dark patina Price: $17.00 (ref: FW015(002)
This primitive looking wrench comes from a company that started back in the early 1850's by manufacturing an improved version of John Manny's combined reaping and mowing machine.

*****************************

Adams Leaning Wheel Road Grader Wrench "172" - Indianapolis, Indiana

Side one marked: "172" and dog bone logo Side two unmarked Length:10½ inches Reference: Not in Rathbone's book but recently identified from an Adams Leaning Wheel Grader Parts Catalog Condition: Good with one edge slightly mushroomed from use as a hammer Price: $24.00 (ref: FW016)
This thick, heavy (three pound) wrench with a hex box and an odd square box on one end and a single open end on the other has been on my orphan wrench list (unidentified wrenches) till recently when a listing was found in an Adams Parts Book. There are at least two versions of this wrench; one with a single size open end and another with two sizes of open ends. This one has one size. Note: This example has the dog bone (>--<) logo (foundry mark used by the Link Belt Company of Indianapolis, Indiana).

******* J I CASE *******

J I Case Tee Wrench "46CL"

Side one: Marked "46CL" and with the Case "Old Abe" eagle logo.
Side two: Unmarked
Length: 8 by 8 inches
Reference: Rathbone's book page 82 and old Case Parts Catalogs.
Condition: Excellent with no signs of pitting or misuse
Price: $20.00 (ref: JIC001)

This wrench is listed in J. I. Case Parts Catalogs for their threshing machines.

*****************************

J I Case Tee Wrench "46CL" (variation)

Side one Marked "46CL"
Side two: Unmarked
Length: 8 by 8 inches
Reference: Case Parts Catalogs (this variation not in Rathbone's book)
Condition: Excellent with no signs of pitting or misuse
Price: $17.50 (ref: JIC002)

This variation does not have the Case Eagle Logo and has a ribbed body instead of round like the one above. This wrench is listed in J. I. Case Parts Catalogs for their threshing machines.

*****************************

J I Case Wrench "OK1294"

Side one marked: "OK1294" and with the Old Abe Case's eagle trademark. Side two unmarked Dimensions: 4.5 by 9 inches Reference: Rathbone's book page 82 Condition: Excellent with no signs of abuse, pitting, breaks, or cracks. A previous owner has painted the wrench machine gray with the part number and eagle highlighted in red Price: $23.00 (ref: JIC004)
There are a lot of "T" shaped wrenches, "L" shaped wrenches and even a few "Y" wrenches but I think this is the only "H" shaped collectible wrench (with an attached pitman tool to boot). Old Case Parts Books list this wrench for their mowers. A different looking wrench that shows no sign of ever being used. Would add variety to your collection of old wrenches hanging on the wall. Or find another one, buy 22 hamsters or other small rodents, train them to play football on a miniature field using the wrenches as goal posts, exhibit them at county fairs, gas and steam engine shows, and antique wrench meets, appear on TV on Letterman's Stupid Pet Tricks and get a date with the grinder girl. All because you bought this wrench.

*****************************

J I Case Steam Engine Wrench "883C"

Side one Marked "883C" Side two: Unmarked Length: 16 inches Reference: Case Steam Engine Parts Catalogs and Rathbone's page 81 Condition: Excellent with no signs of pitting or misuse Price: $38.50 (ref: JIC003)
This wrench is listed one of several listed in J. I. Case Parts Catalogs for their famous steam engines. Used on engines prior to 1910.

******* IHC and Related Companies *******
Wrenches of The Newell Sanders Plow Company - Chattanooga, Tennessee

Newell Sanders founded and was president of both the Chattanooga and the Newell Sanders Plow Companies, both of Chattanooga, Tennessee. After selling Chattanooga to International Harvester and Newell Sanders to The Rock Island Plow Company he was appointed to the United States Senate to fill an unexpired term making his wrenches the only wrenches known marked with the name of a U. S. Senator. The Newell Sanders and Sanders wrenches are included in The IHC wrench list because IHC once sold Sanders equipment.

Newell Sanders Plow Company "A120" Wrench - (IHC related company)

Side one marked: "Newell Sanders Plow Co" Side two marked: "A120" Dimensions: 13 inches Reference: Rathbone's book page 351 Condition: Good with a few dings, mostly on the edges. No pitting, breaks, or cracks. Price: $95.00 (ref: FW024-2)

*****************************

Newell Sanders Plow Company "A260" Wrench - (IHC related company)

Side one marked: "Newell Sanders Plow Co A260" Side two not marked Dimensions: 19 inches Reference: Rathbone's book page 351 Condition: Excellent. Strong lettering and nice dark patina . Price: SOLD
At 19" long this is the biggest and most impressive looking of the known Newell Sanders wrenches.

*****************************

Newell Sanders Plow Company "24" Wrench - (IHC related company)

Side one marked: "Sanders 24" Side two not marked Dimensions: 11.25" inches Reference: Rathbone's book page 411 Condition: Good Plus with a few jaw edge dings and a tiny hairline crack.. Price: SOLD
One of the rarer Newell Sanders wrenches.

*****************************

Newell Sanders Plow Company "A163" Wrench with Hammer Head - (IHC related company)

Side one marked: "Newell Sanders Plow Co" Side two marked: A163 Dimensions: 8.5 inches Reference: Rathbone's book page 351 Condition: Good Plus with a few minor nicks and scratches Price: SOLD
This is the smallest of the known Newell Sanders wrenches.

*****************************

International Harvester Truck Wrench "21080V"

Side one marked: "21080-V" Side two not marked Dimensions: 12.5 inches Reference: Rathbone's book page 252 and old international Harvester Parts Books Price/Condition: $30.00 / Good Plus. Strong lettering and nice dark patina with some edge dings from use as a hammer (ref: IHC014-001) Price/Condition: $25.00 / Has more severe edge mushrooming from hammering (ref: IHC014-002)
This wrench is listed as an "axle nut wrench" in 1920's International Truck Parts Lists.

*****************************

International Harvester Tractor Wrench "11858 DA"

Side one marked "11858 DA" with the IHC Logo Side two: Unmarked Length: 5½ inches Reference: Rathbone's book page 252 and several IHC parts books. Condition: Excellent with no signs of misuse or pitting. Price: $22.50 (ref: IHC002)
This spanner wrench is listed in old International Harvester Company parts catalogs as being furnished with McCormick Deering / Farmall Model F-30, W-30, and M tractors as well as several TracTracTors and IHC crawler tractors. It is listed as a water pump wrench.

*****************************

International Harvester Company Thrashing Machine Wrench "M141"

Side one: "M141" with IHC logo" Side two: Unmarked Length: 9 inches Reference: Rathbone's book page 254 Condition: Excellent - Looks like it was hardly used - Nice dark patina Price: $34.00 (ref: IHC008)
Old International Harvester Company parts catalogs from the 1920's list this wrench as a cylinder wrench for McCormick Deering Harvester Threshers. A different looking IHC wrench that has not been abused or over cleaned.

*****************************

International Harvester Drill Wrench "F8121"

Side one marked F8121". Side two: Unmarked Length: 7 inches Reference: Rathbone's book page 252 and old IHC Parts Catalogs. Condition: Price/Condition: $8.00 / Pitting, part number poorly marked (ref IHC001-002)
This wrench is listed in old McCormick-Deering Parts Lists as being issued with several different drills. There are several variations of this wrench two of which are pictured in Rathbone's book. Known implements that used this wrench are: McCormick Deering Plow Press Drill McCormick-Deering Four Row Beet Drill McCormick-Deering Plain Fluted Feed Grain Drills (Export) (Richmond Type) McCormick-Deering Deep Seeding Drills (double run feed) McCormick-Deering Two Horse and Larger Grain Drills

******* More IHC Wrenches *******
I can email pictures on request

379

7" double open end wrench (ends marked 7/16" and 9/16")

Rathbone page 251

Found in early IHC parts lists for threshing machines and corn pickers

Price: Excellent condition $20.00 - Good Plus $17.00 (ref: IHC011)

Also have one with the hard to find ledger plate logo not shown in Rathbone's book
Price: Good $35.00 (ref: IHC012)

383

9" double open end wrench (ends marked 5/'8" and 11/16")

Rathbone page 251

Found in early IHC parts lists for threshing machines and corn pickers

Price: Excellent condition $8.00 - Good $6.00 (ref: IHC010)

12737D

5 ¼" double open end with one end at 90°

Rathbone page 252

Listed in parts books for: McCormick-Deering 10-20 and 15-30 Chain Drive tractors.
Farmall Regular tractors, F-20 tractors, and Model "20", TA-10, T-40, and TD-40 Trac Tractors.

Price: $8.00 (ref: IHC003)

12737DA

4¾" double open end with one end at 90°

Rathbone page 252

Listed in parts books for: McCormick-Deering Farmall F-12. F-14, F-30, and W-30 Tractors, Harvester Thresher Models 60, 61 and models with Fuller & Johnson or Continental engines.

Price: $18.00 (ref: IHC004)

21264D

7 3/8" open end by box end

Listed in parts books for: McCormick-Deering Farmall F-20. F-30, and W-30 Tractors.

Price: $20.00 (ref: IHC009)

G3170

10 7/8" double open end

Rathbone page 253

Listed in several IHC parts books for most of their early tractors, gas engines and combines.

Price: $20.00 (ref: IHC005)

G3172

6¾ " double open end

Rathbone page 253

Listed in parts books for: Mogul and Titan Tractors, McCormick-Deering 8-16 and 15-30 Chain Drive tractors, Farmall F-30 and W-30 tractors, TA10, T40. and TD40 Trac Tractors, IHC and McCormick-Deering Gas Engines including: Titan, Tom Thumb and others, and several cream separators.

Price: $10.00 (ref: IHC006)

G3173

4 5/8" double open end with angled ends

Rathbone page 253

Listed in parts books for: Mogul and Titan Tractors, McCormick-Deering 8-16,10-20, and 15-30 Chain Drive tractors, Farmall Regular tractors, F-20 and F-30 tractors, and Model "20", and T-40 Trac Tractors, IHC and McCormick-Deering Gas Engines including: Titan, Tom Thumb and others, and several cream separators.

Price: $8.00 (ref IHC007)

G3866

14.5" double open end "S" style wrench

Rathbone page 253

Found in early International parts lists for Mogul, Titian, and 8-16 Chain Drive Tractors, Titian Engines 1908 to 1912 International Harvester 2-Cylinder Engines, and a McCormick-Deering Gang Plow

Price/Condition: $25.00 / Good Plus (ref: IHC013)

Free counters provided by Honesty.com.